Here you find the most recent Riedel products from the entire Riedel solutions portfolio.

Digital Client Card AVB

Converts eight Artist matrix ports to AVB and vice versa.

The Connect AVBx8 converts eight AES signals to AVB and vice versa. Built in a compact 9.5”/1RU housing the device provides eight CAT5 ports to connect up to eight Artist control panels in one or two-channel mode to the matrix via IP-based LANs.     

Dual POTS, ISDN & VoIP Interface

ConnectTrio combines the following in one half-rack/1RU device: two independent analog POTS telephone hybrids; an ISDN S0 interface with two independent ISDN B-channels; and two independent VoIP audio codecs. This not only saves rackspace and eliminates the need for additional equipment, but also provides enhanced flexibility to the intercom installation. Connect Trio enables you to dial, make and receive calls to and from any PSTN, VoIP, ISDN or mobile phone as well as G.722 reporter codecs. When used with Artist intercom systems you can even remote control panels via ISDN.

CWDM Multiplexer/De-Multiplexer

The Riedel MC-CWDM interface is 9.5" wide and offers multiplexing and de-multiplexing capabilities over one duplex fibre link for up to 18 LC duplex single-mode connections of different standards, data rates or protocols, such as MediorNet high speed links. The multiplexed signal is available on either an LC connector (MC-CWDM-L) or on a Neutrik opticalCon Quad connector (MC-CWDM-Q). The MC-CWDM also features a separate LC duplex connector. In the LC version this serves as a coupler for two LC fibres, in the opticalCon Quad version this connector provides access to the second pair of fibres of the opticalCon Quad cable. The connectors are available on either the front or the back of each interface. 

opticalCon Patch Module

The Riedel MC-QP is a 4.75" wide module and provides easy patching of Neutrik opticalCon Quad fiber cables with LC Duplex fiber cables and vice versa.

Multiplexer/De-Multiplexer

Two Multiplexer/De-Multiplexer for multiplexing up to three LC duplex single-mode fibre links each onto one LC connector (MC-WDM-L) or onto the two fibre pairs of one Neutrik opticalCon Quad fibre connector (MC-WDM-Q)

Global Fiber Service

Riedel’s RiLink is the new way to connect broadcast live signals from remote event locations to the studio or to connect foreign studios with their home facility. Based on Riedel’s own global backbone, the RiLink Global Fiber Service transports more than just the HD/SD-SDI video signals that would be furnished by satellite links in a conventional production. It also provides additional features like voice communication and internet access which significantly reduce complexity and costs for planning and operating of remote event productions.

Features:

• Bi-directional
• Faster
• Flat rate
• High-quality
• Everywhere
• Versatile
• Added value
• Reliable
• Full Service

Module Carrier System

Foundation of the Smart Rack solution is the SR-1 Smart Rack Module Carrier System. The SR-1 is a 19”/1RU universal housing offering space for four 4.75" sized modules, two 9,5" sized modules or any combination thereof. The individual modules can be mounted with the rear-side to the front by simply inserting the module backwards. Riedel’s Smart Rack system features a safe and convenient locking mechanism for the modules providing a solution to conveniently rack mount a wide range of accessories from all Riedel product lines.

RF Over Fiber

The Riedel SR-RF modules are 4.75" wide and are the ideal tool for remoting antennas over long distances. The compact units convert analog RF signals into optical modulated signals, which are then transmitted via fiber. At the remote location the optical signal is re-converted into an analog RF signal. RF-over-fiber links can be used for RF receivers and transmitters. The modules operate in the 10 MHz - 1000 MHz range with ± 1dB flatness. The modules are available with a wavelength of 1311nm and 1551nm.