连接到外界的智能无缝接口是很多应用案例中的关键因素。 与众不同的接口解决方案让您方便地与电话、数字和模拟partylines、摄像机通话、2线制无线和其他模拟一技术子系统相连。

Connect Solo系列将您的音频和内通系统连接到PSTN公共电话网络中。它将2个模拟POTS电话耦合器组合在一个半机架宽度/1RU的设备中，紧凑的系统设计使其便于在演播室和转播车内安装。该设备也可以独立使用或喝通话系统集成使用。

连接到外界的智能无缝接口是很多应用案例中的关键因素。Connect Duo系列将您的音频和内通系统连接到ISDN和PSTN公共电话网络中。它将1个ISDN S0接口和1个模拟POTS电话耦合器组合在一个半机架宽度/1RU的设备中，并且允许您拨号，呼出和接受任何来自于PSTN、ISDN或手机的电话，同时支持G.722协议的编解码。由于该产品单元可以通过1个S0接口双向传输两套独立的音频通道，因此允许建立两个独立的目的进行连接。当于Artist内通系统共同时用时，您甚至可以将控制面板通过ISDN进行远程连接。

IP接入提供高质量 Audio-Over-IP的接口。19英寸/1RU单元允许矩阵和矩阵间连接，和矩阵和面板间连接，也可以通过IP传输音频信号。 接口转换一个AES3码流到一个压缩的IP数据流，反之亦然。IP接入可以根据需要设置带宽，以提供持续的高质量的音频和低的网络流量。设备支持远端面板的连接，并实现全部控制功能。

C44系统接口允许无缝地将数字Partyline集成在矩阵通话环境中。19英寸/1RU的设备单元，可将4个双通道CAT5矩阵通道转换为4个有源腰包线路。腰包通过3芯XLR电缆同C44系统接口连接。每条线路最多可以串联16个腰包，一台C44最多可以给38个腰包供电。作为独立应用，该设备内部集成了24x24 数字通话矩阵，它能通过Riedel的软件设置。预设的配置可通过前面板的DIP开关直接调用。

全数字接口用于Artist和Performer32 矩阵系统。模拟4线I/O接口提供给其他矩阵或非矩阵系统。C44给每条独立的有源线路提供短路保护。设备单元后面的独立DC输入输出可用来提供冗余备份电源。

The C44plus System Interface seamlessly integrates digital partylines in matrix intercom environments and can also serve as a stand-alone matrix for small applications. The plus-version features a USB-port on the front to connect a PC to configure the internal 24x24 matrix via the new Performer Audio Assignment Software.

The 19“/1RU unit converts four two-channel CAT5 matrix ports to four phantom powered beltpack lines. The beltpacks are connected to the C44plus via standard 3 pin XLR cables. Up to 16 beltpacks can be daisy-chained on each line, one C44plus can power up to 38 beltpacks. For stand-alone use the device features an integrated 24x24 ports digital intercom matrix, which can be configured via Riedel’s Audio Assignment Software. Pre-programmed configurations can be loaded via the DIP-switches on the front.

Full digital interfacing is provided for Artist and Performer 32 matrix systems. Analogue 4-wire I/Os and GPIs are provided for interfacing to 3rd party intercom systems. The C44 provides short-circuit protection on each powered line individually. Separate DC inputs and outputs at the rear of the unit can be used to provide redundant power.

The Windows-based Performer Audio Assignment Software is an intuitive tool for editing the settings of eight pre-programmed configurations, which can be activated through DIP switches on the front of the Performer C44plus. This expansion will enable the C44plus to serve as the heart of a small stand-alone intercom solution.

The RIF-1032 is an external GPI interface designed for the Artist digital intercom. The device connects to the expansion ports of all Artist 1000, 2000 and 3000 series control panels, as well as the DIF-1000, via CAT5 cabling. While six RIF-1032 GPI interfaces can be cascaded for each matrix port, this versatile interface provides 32 single-fused, potential free change-over contacts as well as potential free inputs.